90 Toyota Celica ALLTRAC Turbo
Nice car. I would of been intrested if it wernt for the miles. But is a nice car if you put in a new engine. Which will cost about $2000.
Any interest in partial trades?
I've got an MR2 so I know all about these motors and have a spare block back home in ohio, i've got a '93 mazda mx-6 v6 5-spd that i'd be willing to trade + cash
where you located? i'm down in naples
aim: notdabob
I've got an MR2 so I know all about these motors and have a spare block back home in ohio, i've got a '93 mazda mx-6 v6 5-spd that i'd be willing to trade + cash
where you located? i'm down in naples
aim: notdabob
The car is reading over 200,000 on it. But the egine has been change for an JDM engine. USDM = 200hp JDM = 240hp factory. The car has stage 5 twin plate clutch, bigger turbo and some other things. I'll post more pics later. Thanks!!!!
__________________
Ok I'm personally highly interested in this car but being an mr2 guy and done a lot with these motors I'd like to point out a few oddities & ask some questions to this.
#1. The 240hp 3SGTE JDM motor was the 3rd gen, 3rd gen does not use MAF it uses MAP, clearly in the 3rd pic on the right I can see a MAF sensor. So mostly likely a 210hp 2nd gen JDM motor.
#2. Where's the stock A2W intercooler???
#3. What turbo is on it? Miles?
#4. Who made the tubular manifold?
I'm gonna give you a call later tonight about the car when I get off work, definately interested.
#1. The 240hp 3SGTE JDM motor was the 3rd gen, 3rd gen does not use MAF it uses MAP, clearly in the 3rd pic on the right I can see a MAF sensor. So mostly likely a 210hp 2nd gen JDM motor.
#2. Where's the stock A2W intercooler???
#3. What turbo is on it? Miles?
#4. Who made the tubular manifold?
I'm gonna give you a call later tonight about the car when I get off work, definately interested.
A2W intercoolers were only stock on 4th gen Alltracs, 5th gen CS/RC/GrpA models (which we did not get in the United States), and 6th gen GT-Fours (which we also did not get here). That's the stock IC with the shroud off.
The manifold is either an Aussie or one of the Aussie copies that were on Ebay not too long ago. And that looks like a stock CT26, could be upgraded or a CT20b.
I know I'm not the owner but I figured I'd answer some questions since I know the answers
The manifold is either an Aussie or one of the Aussie copies that were on Ebay not too long ago. And that looks like a stock CT26, could be upgraded or a CT20b.
I know I'm not the owner but I figured I'd answer some questions since I know the answers
/\/\/\/\/\/\/\/\/\/\ dam! Thanks man! Talking about . . . you got ? ...we got answers!
Listen I'm not Radio Shack, I'm a Honda kind of guy, give me a call and I'll get you all the info you need from my friend who owns the car. (321)377-5287 work cell. eddie
Listen I'm not Radio Shack, I'm a Honda kind of guy, give me a call and I'll get you all the info you need from my friend who owns the car. (321)377-5287 work cell. eddie
__________________