FS: 95 Mustang Gt Modded/ Chrome Yellow
FS: 95 Mustang Gt Modded/ Chrome Yellow
My wife goes into the hospital Friday morning to give birth to my first child. I do not see myself having to much time to work on this car not to mention not being the best car to put a child seat in. I am looking for $5900obo. The car has tons of mods. It just had a paint job about a month ago and looks great. The interior looks like its suppose to, old/ The leather on the two front seats looks like crap, the back looks brand new. Headliner, door panels, carpet, dash all in great shape. I am sure I will miss something so just ask.
*Pros:
Motor has 500 miles.
-Fully Balanced 306 SRP 9.5 to 1 Forged pistons, Eagle rods, Total seal rings, TFS Main Girdle, ARP Main Bolts. Cranks been cut 10-10.
-Edelbrock Heads 1.90/1.60 with lockwire headgaskets. ARP Head Studs, Crane cams 1.6 Gold Rockers, Hardened pushrods, FMS high Rev lifters, x303 cam with 3-position adjustable timing chain. BBK underdrive pulley kit
-Trickflow upper/lower intake manifold. Edelbrock 70mm Throttlebody, BBK Intake, Pro-m 75mm maf calibrated for the 24lbs injectors. Ajustable fuel pressure regulator, walbro lph fuel pump. MSD 6A, MSD cap, MSD coil, Taylor wires
- Suspension: KYB AGX ajustable shocks front and rear, Eibach springs, Hotchkis F&R Sway bars, Camber/Caster plates, All Urethane Bushings, Steeda bump steer correction kit, Hotchkis Strut tower brace, Gripp sub frame connectors, FMS Rear Upper control arms, Maximum Rear lower contol arms. 3.73 Gears
-BBK long tube headers, bbk h-pipe, 40 series Flowmasters
-FMS Clutch, Hurst short shifter, Urethane trans mount
-Cobra R Hood, Newer style taillights
-Pioneer DEH-P6500 cd/mp3 player, Fosgate components in the front, fosgate 6x8 in the rear, One 4-channel Precision Power amp for the interior, one 2-channel for the two fosgate he-2 12 subs in the bandpass box in the trunk.
*Cons
-Passenger side door lock actuator is bad
- A/C compressor is leaking. I checked it with my sniffer and thats the only place it leaks from.
- Tie rod ends need to be replaced( Have them, just need to be installed.)
-Throwout bearing started to make noise a week ago. It got replaced when the new motor when in 500 miles ago. My guess its just a defective bearing.
-Headlights have oxidation on the outside
*Pros:
Motor has 500 miles.
-Fully Balanced 306 SRP 9.5 to 1 Forged pistons, Eagle rods, Total seal rings, TFS Main Girdle, ARP Main Bolts. Cranks been cut 10-10.
-Edelbrock Heads 1.90/1.60 with lockwire headgaskets. ARP Head Studs, Crane cams 1.6 Gold Rockers, Hardened pushrods, FMS high Rev lifters, x303 cam with 3-position adjustable timing chain. BBK underdrive pulley kit
-Trickflow upper/lower intake manifold. Edelbrock 70mm Throttlebody, BBK Intake, Pro-m 75mm maf calibrated for the 24lbs injectors. Ajustable fuel pressure regulator, walbro lph fuel pump. MSD 6A, MSD cap, MSD coil, Taylor wires
- Suspension: KYB AGX ajustable shocks front and rear, Eibach springs, Hotchkis F&R Sway bars, Camber/Caster plates, All Urethane Bushings, Steeda bump steer correction kit, Hotchkis Strut tower brace, Gripp sub frame connectors, FMS Rear Upper control arms, Maximum Rear lower contol arms. 3.73 Gears
-BBK long tube headers, bbk h-pipe, 40 series Flowmasters
-FMS Clutch, Hurst short shifter, Urethane trans mount
-Cobra R Hood, Newer style taillights
-Pioneer DEH-P6500 cd/mp3 player, Fosgate components in the front, fosgate 6x8 in the rear, One 4-channel Precision Power amp for the interior, one 2-channel for the two fosgate he-2 12 subs in the bandpass box in the trunk.
*Cons
-Passenger side door lock actuator is bad
- A/C compressor is leaking. I checked it with my sniffer and thats the only place it leaks from.
- Tie rod ends need to be replaced( Have them, just need to be installed.)
-Throwout bearing started to make noise a week ago. It got replaced when the new motor when in 500 miles ago. My guess its just a defective bearing.
-Headlights have oxidation on the outside
Bump for laz really clean well taken care of car ..
Help him get a car to put a baby seat in !
Help him get a car to put a baby seat in !
__________________
R.I.P. Kevin "Slo-Si" Gonzalez
Hondata saves lives
S300 and K-Pro tuning 813-433-3721
Crome OBD1 Editing/Chipped ECU's/Wiring/Track Setup
Prayoonto/DSS/Precision/TiAl/JE/Eagle/PPG/Supertech Equipped
R.I.P. Kevin "Slo-Si" Gonzalez
Hondata saves lives
S300 and K-Pro tuning 813-433-3721
Crome OBD1 Editing/Chipped ECU's/Wiring/Track Setup
Prayoonto/DSS/Precision/TiAl/JE/Eagle/PPG/Supertech Equipped
I have a 95 240. Very clean, fits a baby seat back there, I have a 3 y/o and a 5 y/o. ICE cold A/C. Several new parts. Pics in my gallery, I keep my Y2K cobra R's and you keep the bullets. If need be, I can even line your pockets a little. LMK.