*S10 350* -Performance Package- 'make offers'
Registered User
Thread Starter
Join Date: Sep 2008
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
*S10 350* -Performance Package- 'make offers'
Alright Guys this is what I have to sell as a package or to part out...
Ok so I used to have an S10 with a built 350 till it burn't down.
I had even more parts I was going to put into it..
Then I bought an S10 again to start over but times are rough..
The v6 I had in it just lost the top end due to timing belt.
I will add pictures on next post.
The parts I have are as listed.
*Camshaft - Brand New In Box
Parts # 2102
(280-350) (1967-1987)
RPM Range: Idle-5500
Durrahon at 0.006" lift Intake 278 deg. Exhaust 288 deg.
Durrahon at 0.050" lift Intake 204 deg. Exhaust 214 deg.
Lift at Cam Intake 0.280" Exhaust 0.295"
Lift at Valve Intake 0.420" Exhaust 0.442"
-*Lifters included*
*B&M Pro Bandit Speed Shifter (Special Edition Carbon Fiber)
-(TH 350 Tranny) Brand New In Box
*Mr. Gasket Headers - Used but no cracks - Chevy 350
*Accel Performance Distributor - Used
*Accel Performance Super Coil - Used
*Trand dapt 2.8 S10 to 350 S10 Motor Mounts
* 93 2.8 S10 ( Blown 2.8 )
-Lowered 5" Spindles 4" Blocks
-17" CNC Wheels
-3" Cowl Hood
-Shaved Gas Cap and Rear lights
-Bucket Seats
-Redwood Grant GT Steering Wheel
-Tunnel Cover
-Sunroof
-Molded Roll Pan
Alright Guys I will have pics shortly.... So let the offers Begin!!
Ok so I used to have an S10 with a built 350 till it burn't down.
I had even more parts I was going to put into it..
Then I bought an S10 again to start over but times are rough..
The v6 I had in it just lost the top end due to timing belt.
I will add pictures on next post.
The parts I have are as listed.
*Camshaft - Brand New In Box
Parts # 2102
(280-350) (1967-1987)
RPM Range: Idle-5500
Durrahon at 0.006" lift Intake 278 deg. Exhaust 288 deg.
Durrahon at 0.050" lift Intake 204 deg. Exhaust 214 deg.
Lift at Cam Intake 0.280" Exhaust 0.295"
Lift at Valve Intake 0.420" Exhaust 0.442"
-*Lifters included*
*B&M Pro Bandit Speed Shifter (Special Edition Carbon Fiber)
-(TH 350 Tranny) Brand New In Box
*Mr. Gasket Headers - Used but no cracks - Chevy 350
*Accel Performance Distributor - Used
*Accel Performance Super Coil - Used
*Trand dapt 2.8 S10 to 350 S10 Motor Mounts
* 93 2.8 S10 ( Blown 2.8 )
-Lowered 5" Spindles 4" Blocks
-17" CNC Wheels
-3" Cowl Hood
-Shaved Gas Cap and Rear lights
-Bucket Seats
-Redwood Grant GT Steering Wheel
-Tunnel Cover
-Sunroof
-Molded Roll Pan
Alright Guys I will have pics shortly.... So let the offers Begin!!
Last edited by AnarchyJake; 09-19-2008 at 09:18 PM.
Registered User
Join Date: Dec 2005
Posts: 293
Likes: 0
Received 0 Likes
on
0 Posts
Trade for a 1990 CRX SI with Mini ME swap? The car is running and has all interior.. lemme know ASAP!! I pretty much just want the truck man.. what can we work out!!!??
__________________
Last edited by *SoSimple*TSI; 09-20-2008 at 04:51 PM.
Registered User
Thread Starter
Join Date: Sep 2008
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
the truck has a dent on the passenger side door. and a dent on the bumper. aswell as a cracked windsheld. if your seriouse let me no. i could use a runnin car.
