Ford, Lincoln, Mercury Tech Automotive Related Topics Only !

Need Suggestions About Where to Get A Good Glide ?

Thread Tools
 
Old 01-03-2008 | 07:04 PM
  #1 (permalink)  
Scott's Avatar
Thread Starter
You can thank me later...
 
Joined: Aug 2001
Posts: 36,199
Likes: 0
Question Need Suggestions About Where to Get A Good Glide ?

I really wanted to get into the 8's with a C4 but I have decided before I go wrecking a perfectly good and fresh C4 with all the goodies I am going to put in a glide and be done with it.

I am going to need something that can handle quite a bit of power, some stocker or slightly modified piece is not going to cut it now or when I run the boost up.

I picked up a ton of brochures at PRI for Powerglide companies so I have a good starting point but I want to hear some first hand accounts if possible.

As mentioned I would prefer someone local or within the state to make it easier to pick up, make adjustments to if needed, and keep cost down some. While I am not looking for some billet case $4k job I do not want to do this twice.

But I am not limiting myself to just Florida companies, just would prefer it.

So please post up any first hand knowledge so I can make a educated decision.


Thanks in advance.

-
__________________
9.31 @ 148.12 ( Drag radials, street driven, low boost, no fancy race car shit....
___________________________________________
TR's Official In House Realtor
PM or E-mail Me If you are Looking To Buy/Sell/Rent A Home.
Special TR Bonus For Using My Services.
___________________________________________
Old 01-03-2008 | 08:02 PM
  #2 (permalink)  
Strokd85's Avatar
Daddy-O
 
Joined: Aug 2001
Posts: 3,300
Likes: 0
Default

Scott, I had Rob @ Fordspeed build mine. Wasn't anything high dollar, but it did have a good converter (IIRC that ran just under 1k) and was well put together.
Worked like a charm.
I'd give him a shout.
__________________
I am your penalty.....

Last edited by Strokd85; 01-03-2008 at 08:04 PM.
Old 01-03-2008 | 10:23 PM
  #3 (permalink)  
franktf's Avatar
Registered User
 
Joined: Mar 2007
Posts: 1,334
Likes: 0
Default

Paul Dorn, He does alot of the local drag racers..... If you have seen Lip Shifted on a race car that is who I am talking about..... He can do anything from mild to wild and he is usually resonably priced and best of all he stand behind his work..... He just moved his business not to long ago, I believe he is in Safety Harbor now..... I'll pm you his number.....
Old 01-04-2008 | 03:09 AM
  #4 (permalink)  
Stoopid Wendy's Avatar
see dick run
 
Joined: Oct 2005
Posts: 1,099
Likes: 0
Default

scott i just had my glide done by paul dorn. just got it back last week. my husband has been dealing with Paul for more than 10 years now. he won't go to anyone else.

and yes, he is on SR 590 in safety harbor.
__________________
handle every stressful situation like a dog: if you can't eat it or play with it, just pee on it and walk away.
Old 01-04-2008 | 07:00 AM
  #5 (permalink)  
Drace1963's Avatar
Member
 
Joined: Apr 2004
Posts: 563
Likes: 0
Default

Used to use Paul. But now I use Steve with CRT. He just moved to zepherhills. He will have the glide you are looking for.
__________________




Originally Posted by Zate
i still stand by the fact that 75% of 16-23 year olds are dropped babies.
Originally Posted by Boosted240
Mustangs are the hondas of the domestic cars. The drivers are always doing ricer revs and just like hondas, about the only place you cant buy parts for them is at 7-11.
Old 01-04-2008 | 07:15 AM
  #6 (permalink)  
Na306StAnG's Avatar
Flowmaster nut swinger
 
Joined: Jan 2005
Posts: 7,535
Likes: 0
Default

I'll bet all the money in the world Scott doesn't go with CRT
__________________
All American Street Car Performance <--- Facebook page link, check us out!
6187 126th Ave North
Largo fl 33773
MV#72427
(727)535-6905 - Shaun

Old 01-04-2008 | 08:52 AM
  #7 (permalink)  
Scott's Avatar
Thread Starter
You can thank me later...
 
Joined: Aug 2001
Posts: 36,199
Likes: 0
Default

Originally Posted by Na306StAnG
I'll bet all the money in the world Scott doesn't go with CRT


O.k. I have to ask why ? I must be missing something.

And now after talking to J & W Transmissions on the other coast I am considering a TH400.
Old 01-04-2008 | 09:59 AM
  #8 (permalink)  
Na306StAnG's Avatar
Flowmaster nut swinger
 
Joined: Jan 2005
Posts: 7,535
Likes: 0
Default

Originally Posted by Scott
O.k. I have to ask why ? I must be missing something.
You don't remember all the shit I had and Adam/Pat had with CRT....

Plus the only person i have ever heard good things about CRT is from Chad.
__________________
All American Street Car Performance <--- Facebook page link, check us out!
6187 126th Ave North
Largo fl 33773
MV#72427
(727)535-6905 - Shaun

Old 01-04-2008 | 01:04 PM
  #9 (permalink)  
n8secstangg's Avatar
Registered User
 
Joined: Aug 2003
Posts: 1,399
Likes: 0
Default

other than the deal with adam( which i still dont rightfully know what happened) i have never had a problem with our glide or any other glidfe/c-4/t-5/AOD/E4OD...well u get the point...i have 100% faith in anything he has ever done for me
__________________

www.racinginnovationsfl.com
www.xsrcylinderheads.com
4.842@156 and 7.53@192 on radials
Old 01-04-2008 | 01:35 PM
  #10 (permalink)  
GNs-r-slow's Avatar
Bondsman
 
Joined: Oct 2005
Posts: 8,023
Likes: 0
Default

One thing I can promise you, being in business, no matter what type, you will NEVER please everyone. I've always heard good things about CRT



All times are GMT -8. The time now is 05:10 PM.