Fitment & Stance Pictures
18x10 +13 with a 235/40 Dunlop Direzza DZ101 on the rear of my S13 with slightly pulled fenders with -3.75 -4 ish * of camber...
S13 - 17x9 +12, 235/40, roll, 2.2
17x9 +17
4 degrees of camber
~10mm pull
25mm spacers
215/45/17
Front:
Wheel: 17x9.5 +12 w/ 15mm spacer = 17x9.5 -3
Tire: 235/40
Fenders: 20mm Fronts
Camber: -3.5
Rear:
Wheel 18x9.5 +12 no spacer
Tire: 235/40
Fender: 30mm Origin Fender pushed in.
Camber: -2.2
This is all with -3 front and -3.5 to -4 rear
17x9 -3 (15mm spacer) all around, 225/45/17 st115
17x9 +0, 17x10 +12 205/45, 235/45 federal 595
17x9 -6 all around, 205/45/17 federal 595
I think this setup is my fav!
17x9 +5 17x10 -1 235/40/17 fm901 all around
Wheel: 17x9.5 +12 w/ 15mm spacer = 17x9.5 -3
Tire: 235/40
Fenders: 20mm Fronts
Camber: -3.5
Rear:
Wheel 18x9.5 +12 no spacer
Tire: 235/40
Fender: 30mm Origin Fender pushed in.
Camber: -2.2
This is all with -3 front and -3.5 to -4 rear
17x9 -3 (15mm spacer) all around, 225/45/17 st115
17x9 +0, 17x10 +12 205/45, 235/45 federal 595
17x9 -6 all around, 205/45/17 federal 595
I think this setup is my fav!
17x9 +5 17x10 -1 235/40/17 fm901 all around