Del Sol TURBO (Work in progress)!!!
John @ LHT Performance
Thread Starter
Join Date: Sep 2003
Posts: 2,120
Likes: 0
Received 0 Likes
on
0 Posts
Del Sol TURBO (Work in progress)!!!
Here is a pic of a Honda Del Sol that we will be turbocharging using our LHT400 Kit. These two, show the engine bay before any work by us has been done. We will update it as we go. 
This has a stock JDM Type R engine swap, the compression is 11-1 from the factory so the plan is around 270whp ( 7-8 psi).
We will also be building and installing one of our 3" Stainless exhausts.
This will be on Display at the LHT Open house , See it in person. Dec 17th
Updates 12/6/2006
The exhaust manifold had been removed for test fitting the Turbo and manifold.It also give us chance to clean up the engine bay . Note the thottle cable has ben replaced with new the right size.
The intercooler is mounted keeping the bumper support, It is a Precision AS1025 ( 600HP) which has been our favorite , We have used this intercooler over 600whp and it's performed fanatstic.
This has a stock JDM Type R engine swap, the compression is 11-1 from the factory so the plan is around 270whp ( 7-8 psi).
We will also be building and installing one of our 3" Stainless exhausts.
This will be on Display at the LHT Open house , See it in person. Dec 17th
Updates 12/6/2006
The exhaust manifold had been removed for test fitting the Turbo and manifold.It also give us chance to clean up the engine bay . Note the thottle cable has ben replaced with new the right size.
The intercooler is mounted keeping the bumper support, It is a Precision AS1025 ( 600HP) which has been our favorite , We have used this intercooler over 600whp and it's performed fanatstic.
__________________
www.lhtperformance.net.
727 344 1800
*Turbocharging* Engine building* Tuning *Intercooler piping*exhausts* headers* clutches ,fabrication and much more
13 years in the same location.
** HONDATA Authorized Dealer+ Tuner **
01 Type R-647whp street car w' AC - Cover of turbo magazine Feb 2008
01 K20a INSIGHT - Cover of Honda Tuning magazine June 2008
2011 KR-Z K20 powered CR-Z -Cover of Honda Tuning magazine April 2011
www.lhtperformance.net.
727 344 1800
*Turbocharging* Engine building* Tuning *Intercooler piping*exhausts* headers* clutches ,fabrication and much more
13 years in the same location.
** HONDATA Authorized Dealer+ Tuner **
01 Type R-647whp street car w' AC - Cover of turbo magazine Feb 2008
01 K20a INSIGHT - Cover of Honda Tuning magazine June 2008
2011 KR-Z K20 powered CR-Z -Cover of Honda Tuning magazine April 2011
Parting out MSP 0.5!
Join Date: Dec 2005
Posts: 125
Likes: 0
Received 0 Likes
on
0 Posts
sweet. cant wait to see updated pics!
__________________
2003.5 Blue MSP
2002 Honda Civic LX ::Sigh:: -- Traded
2003.5 Silver MSP -- Totalled RIP
1993 Honda del Sol -- SOLD $6500
1967 VW Beetle -- SOLD $3000
2003.5 Blue MSP
2002 Honda Civic LX ::Sigh:: -- Traded
2003.5 Silver MSP -- Totalled RIP
1993 Honda del Sol -- SOLD $6500
1967 VW Beetle -- SOLD $3000
John @ LHT Performance
Thread Starter
Join Date: Sep 2003
Posts: 2,120
Likes: 0
Received 0 Likes
on
0 Posts
Manifold and turbo are installed with the oil feed and drain. The manifold if a shorty tubular ( on the LHT Type R) which allows for a true 3" downpipe. This is AC compatble , it has ample room for the factory AC fan so everything functions.The manifold is Thermal coated black , This helps with under hood temps.
The downpipe has the Waste gate routed back into the exhaust .This is not only sounds better but makes it easier to hear other things that might go on under the hood. Some say this is restrictive, We have used this method on 600 + HP cars.
The downpipe has the Waste gate routed back into the exhaust .This is not only sounds better but makes it easier to hear other things that might go on under the hood. Some say this is restrictive, We have used this method on 600 + HP cars.
__________________
www.lhtperformance.net.
727 344 1800
*Turbocharging* Engine building* Tuning *Intercooler piping*exhausts* headers* clutches ,fabrication and much more
13 years in the same location.
** HONDATA Authorized Dealer+ Tuner **
01 Type R-647whp street car w' AC - Cover of turbo magazine Feb 2008
01 K20a INSIGHT - Cover of Honda Tuning magazine June 2008
2011 KR-Z K20 powered CR-Z -Cover of Honda Tuning magazine April 2011
www.lhtperformance.net.
727 344 1800
*Turbocharging* Engine building* Tuning *Intercooler piping*exhausts* headers* clutches ,fabrication and much more
13 years in the same location.
** HONDATA Authorized Dealer+ Tuner **
01 Type R-647whp street car w' AC - Cover of turbo magazine Feb 2008
01 K20a INSIGHT - Cover of Honda Tuning magazine June 2008
2011 KR-Z K20 powered CR-Z -Cover of Honda Tuning magazine April 2011
John @ LHT Performance
Thread Starter
Join Date: Sep 2003
Posts: 2,120
Likes: 0
Received 0 Likes
on
0 Posts
Next we build in the intercooler piping, It is 2.5" Aluminum . Aluminum is not only very light but helps disapate heat lke a radiator. We bead roll the ends and use 4 ply silicone connectors to prevent pipes blowing off.
The customer wanted the pipes polished and a greddy BOV which you will see later.
The customer wanted the pipes polished and a greddy BOV which you will see later.
__________________
www.lhtperformance.net.
727 344 1800
*Turbocharging* Engine building* Tuning *Intercooler piping*exhausts* headers* clutches ,fabrication and much more
13 years in the same location.
** HONDATA Authorized Dealer+ Tuner **
01 Type R-647whp street car w' AC - Cover of turbo magazine Feb 2008
01 K20a INSIGHT - Cover of Honda Tuning magazine June 2008
2011 KR-Z K20 powered CR-Z -Cover of Honda Tuning magazine April 2011
www.lhtperformance.net.
727 344 1800
*Turbocharging* Engine building* Tuning *Intercooler piping*exhausts* headers* clutches ,fabrication and much more
13 years in the same location.
** HONDATA Authorized Dealer+ Tuner **
01 Type R-647whp street car w' AC - Cover of turbo magazine Feb 2008
01 K20a INSIGHT - Cover of Honda Tuning magazine June 2008
2011 KR-Z K20 powered CR-Z -Cover of Honda Tuning magazine April 2011
Smith & Wesson Protected.
Join Date: Apr 2006
Posts: 3,617
Likes: 0
Received 0 Likes
on
0 Posts
Thats some nice ass work on the welding!!
__________________
-Induction Performance
ALPHA Tuned.
-ROQUE MACHINE SHOP For ALL your fabrication needs.
-Induction Performance
ALPHA Tuned.-ROQUE MACHINE SHOP
For ALL your fabrication needs.
Rick James bitch
Join Date: Dec 2004
Posts: 4,570
Likes: 0
Received 0 Likes
on
0 Posts
nice looking
__________________
TR 5th Gen Civic CREW Member #14
T & C Racing
What VP Race fuel's should we carry?
FT Crew Mascot lol
Gotta love my hater fan club. I love the fact people worry about me 24/7 Ill never be forgotten. I love you guys.....
TR 5th Gen Civic CREW Member #14
T & C Racing
What VP Race fuel's should we carry?
FT Crew Mascot lol
Gotta love my hater fan club. I love the fact people worry about me 24/7 Ill never be forgotten. I love you guys.....
Registered User
Join Date: Jul 2005
Posts: 5,766
Likes: 0
Received 0 Likes
on
0 Posts
Could you please explain why you didn't use the typical hole on the outer side of the frame rail for the IC piping? Piping & DP look great!
Silver del sol ?????????
Silver del sol ?????????
__________________
Vance @ 863-604-2139 for any questions
Vance @ 863-604-2139 for any questions
