make your own carbon fiber parts, carbon fiber startup kit for sale
make your own carbon fiber parts, carbon fiber startup kit for sale
Hi, been lurking on here for a while. Sorry my first post is selling something.
I hate to sell all of this but with school I just don't have the time to play with it. Everything I have here is all you will need to start making carbon fiber parts. I even have the instructional video that teaches you how to do it all. All of the carbon fiber is 1st quality and the epoxies are some of the best made. Pretty much everything is barely used or brand new. I added it all up and for what I have you would be spending close to $600 to buy it all new. I am looking to get $250 out of it. My loss is your gain and this is a steal. I'd like to sell this local because if I put it on ebay the shipping costs for all of this are going to be crazy.
I bought pretty much everything from US Composites. www.shopmaninc.com
INCLUDED: I didvided it all into 3 sections and each cost about $200.
(~$200)
- 1.25 yds of blue kevlar/carbon fiber weave (5.5oz, 2x2 twill)
- 1 yd of red kevlar/carbon fiber weave (5.5oz, 2x2 twill)
- 1 yd of yellow kevlar/carbon fiber weave (5.5oz, 2x2 twill)
- 1.25 yds of 19.7oz 2x2 twill carbon fiber weave (very thick)
- 1 yd of 5.7oz plain weave carbon fiber
- 3 yds of peel ply (leaves a coarse finish on the carbon fiber)
- 1 yd of coremat (adds strength to carbon fiber when placed between layers)
(~$200)
- custom made 1/4" tempered glass sheets for making flat glossy carbon fiber pieces
- couple brushes
- 9.5" kevlar shears
- assorted mixing cups
- assorted mixing sticks
- 4" detail roller
- select products instructional carbon fiber vhs tape
- 1/4" corner roller
- 2" radius roller
- meguire's mold release wax
- fiberglass epoxy, hardener, and woven mat
- assorted plastic epoxy spreaders
(~$200)
- 1 gallon US composites 635 thin epoxy resin system with slow hardener
- 5oz of medium hardener for the 635 epoxy
- 1 gallon of plasti-paste mold making system
- 1 gallon of mold max silicone mold making system
Here are the pics of it all...
I hate to sell all of this but with school I just don't have the time to play with it. Everything I have here is all you will need to start making carbon fiber parts. I even have the instructional video that teaches you how to do it all. All of the carbon fiber is 1st quality and the epoxies are some of the best made. Pretty much everything is barely used or brand new. I added it all up and for what I have you would be spending close to $600 to buy it all new. I am looking to get $250 out of it. My loss is your gain and this is a steal. I'd like to sell this local because if I put it on ebay the shipping costs for all of this are going to be crazy.
I bought pretty much everything from US Composites. www.shopmaninc.com
INCLUDED: I didvided it all into 3 sections and each cost about $200.
(~$200)
- 1.25 yds of blue kevlar/carbon fiber weave (5.5oz, 2x2 twill)
- 1 yd of red kevlar/carbon fiber weave (5.5oz, 2x2 twill)
- 1 yd of yellow kevlar/carbon fiber weave (5.5oz, 2x2 twill)
- 1.25 yds of 19.7oz 2x2 twill carbon fiber weave (very thick)
- 1 yd of 5.7oz plain weave carbon fiber
- 3 yds of peel ply (leaves a coarse finish on the carbon fiber)
- 1 yd of coremat (adds strength to carbon fiber when placed between layers)
(~$200)
- custom made 1/4" tempered glass sheets for making flat glossy carbon fiber pieces
- couple brushes
- 9.5" kevlar shears
- assorted mixing cups
- assorted mixing sticks
- 4" detail roller
- select products instructional carbon fiber vhs tape
- 1/4" corner roller
- 2" radius roller
- meguire's mold release wax
- fiberglass epoxy, hardener, and woven mat
- assorted plastic epoxy spreaders
(~$200)
- 1 gallon US composites 635 thin epoxy resin system with slow hardener
- 5oz of medium hardener for the 635 epoxy
- 1 gallon of plasti-paste mold making system
- 1 gallon of mold max silicone mold making system
Here are the pics of it all...
Last edited by LUCKYDEVIL; 10-08-2004 at 12:56 PM.