Presidential Detaled: 1994 Toyota Supra
Presidential Detailed: 1994 Toyota Supra UPDATED!!!
As soon as Angelo's Type R left my house, about 10 minutes later Pheobo rolls up in his 800WHP Supra!! I spent the last 24 hours getting this car ready for a local Supra Dyno Day!!Man was I exhausted the next day! Well here are the pics!
Exterior:
Optimum Car Wash
DD "Uber" Red Drying Towel
DD "Uber" Wool Mitt
Dual Buckets with Grit Guards
3m "green" Masking Tape
Optimum Instant Detail Spray
Adams Professional Clay Bar
P21S TAW
Adam's Invisible Undercarriage Spray
Menzerna IP/LC PFW Pad
Menzerna 106FF/ LC CCS White Pad
Menzera PO85RD/ LC CCS Blue Pad
Menzerna Top Inspection
Tons of Uber MF Towels
Adams Window Cleaner
Black WOW
LSP:
Lusso Oro applied with Uber Foam Applicator
Wheels:
P21S Wheel Cleaner Gel
Swissvax Pneu
Swissvas Cleaner Fluid
Swissvax Autobahn
Tools:
Dual Work Lamps
Dewalt Hi Speed Rotary
World's Greatest Boar's Hair Wheel Brush
Foam Pad Cleaning Brush
DD Detail Sponge
The Wheel Well/Fender Brush
The Spoke Brush
Canon Rebel XTi
Craftsmen 295MPH Vac/Blow
WHEELS BEFORE:
Had to buy a low-profile jack for this one..
Once the wheels were off the car..
Inside..
The products going to be used..
50/50 after Adams Metal Polish #1
Completely Polished(Spent total of 6 hours on all the wheels! )
Getting the Swissvax Treatment
Passenger Wheels
Driver Wheels
Exterior:
Optimum Car Wash
DD "Uber" Red Drying Towel
DD "Uber" Wool Mitt
Dual Buckets with Grit Guards
3m "green" Masking Tape
Optimum Instant Detail Spray
Adams Professional Clay Bar
P21S TAW
Adam's Invisible Undercarriage Spray
Menzerna IP/LC PFW Pad
Menzerna 106FF/ LC CCS White Pad
Menzera PO85RD/ LC CCS Blue Pad
Menzerna Top Inspection
Tons of Uber MF Towels
Adams Window Cleaner
Black WOW
LSP:
Lusso Oro applied with Uber Foam Applicator
Wheels:
P21S Wheel Cleaner Gel
Swissvax Pneu
Swissvas Cleaner Fluid
Swissvax Autobahn
Tools:
Dual Work Lamps
Dewalt Hi Speed Rotary
World's Greatest Boar's Hair Wheel Brush
Foam Pad Cleaning Brush
DD Detail Sponge
The Wheel Well/Fender Brush
The Spoke Brush
Canon Rebel XTi
Craftsmen 295MPH Vac/Blow
WHEELS BEFORE:
Had to buy a low-profile jack for this one..
Once the wheels were off the car..
Inside..
The products going to be used..
50/50 after Adams Metal Polish #1
Completely Polished(Spent total of 6 hours on all the wheels! )
Getting the Swissvax Treatment
Passenger Wheels
Driver Wheels
__________________
Last edited by Presidential_Detail; 09-02-2008 at 05:58 PM.
Now to the undercarriage..I did the full treatment on this one!
Working in the cleaner..
Now the finished Undercarriage!
Working in the cleaner..
Now the finished Undercarriage!
__________________
Last edited by Presidential_Detail; 08-31-2008 at 09:22 AM.
Now the engine gets a little attention..
BEFORE
Working in the product..
Once it dried..
And finally finished, sorry for only one picture. I was working 24 hours through the night to get this car finished in time a big meet.
BEFORE
Working in the product..
Once it dried..
And finally finished, sorry for only one picture. I was working 24 hours through the night to get this car finished in time a big meet.
__________________
Last edited by Presidential_Detail; 08-31-2008 at 09:25 AM.
NOW TO EXTERIOR!
When it arrived..
P21s TAW Pre-Soak on soiled areas..
Washed, clayed and ready to be polished..
Had to take off the hatch panel to get the wing off of the car..
Once Removed..
A Little P21S TAW..
In the Halogens..
Taped up..
50/50 on the Hood..
After Menzerna IP/LC PFW(1st Stage)
Pre-rinse to the next stage to make sure all oils were off the car..
Starting to get tired at this point..its been a long day.
When it arrived..
P21s TAW Pre-Soak on soiled areas..
Washed, clayed and ready to be polished..
Had to take off the hatch panel to get the wing off of the car..
Once Removed..
A Little P21S TAW..
In the Halogens..
Taped up..
50/50 on the Hood..
After Menzerna IP/LC PFW(1st Stage)
Pre-rinse to the next stage to make sure all oils were off the car..
Starting to get tired at this point..its been a long day.
__________________
Last edited by Presidential_Detail; 08-31-2008 at 09:44 AM.
AND NOW AFTER A FULL 24 HOURS OVER NIGHT TO GET IT READY!
I finished at 8am in the morning, customer arrived JUST as I finished drying it off!
I didnt have any more time to take more final shots.
I finished at 8am in the morning, customer arrived JUST as I finished drying it off!
I didnt have any more time to take more final shots.
__________________
Last edited by Presidential_Detail; 08-31-2008 at 09:39 AM.
Ok, I promise last one!
__________________
Yes, engine bay is getting done too. It is all chrome but it was a mess though!
__________________
It makes me sad too... Its been sitting outside for a couple weeks bc the garage has been taken for customer cars over the last couple weeks...and no time to was either. It will get the full treatment again soon!
__________________