Albert's Toyota Supra Low Boost No Nitrous Dyno
Thread Starter
Registered User
Joined: Jul 2002
Posts: 9,270
Likes: 0
Albert's Toyota Supra Low Boost No Nitrous Dyno
YouTube - Albert's Toyota Supra VP Q16 Dyno Powerglide 76mm
We were having some issues so through the car on the dyno. Two low boost pulls. Be back at the dyno tomorrow for high boost nitrous and hopefully back to the track. Drivetrain issues were taken care of. Powerglide was built incorrectly by last builder
We were having some issues so through the car on the dyno. Two low boost pulls. Be back at the dyno tomorrow for high boost nitrous and hopefully back to the track. Drivetrain issues were taken care of. Powerglide was built incorrectly by last builder
__________________
- Induction Performance
* IP E-Mail
* IP Face Book
* IP Web-Site
* RIP Kevin/Slo_Si RIP & Pablo/Fathead
- Induction Performance
* IP E-Mail
* IP Face Book
* IP Web-Site
* RIP Kevin/Slo_Si RIP & Pablo/Fathead
Thread Starter
Registered User
Joined: Jul 2002
Posts: 9,270
Likes: 0
If I could remember I would post 
I didnt care about numbers that day. We really dont use the dyno for numbers with this car. If I had to say that pull was 800whp - 830whp SAE. The car on the old bad trans dyno'd 920whp I think it was. Remember this is through an automatic transmission. See what it does at the track tomorrow night if the high boost nitrous pulls go good with the new cam sensor, cam sensor plug, trans, etc.
I didnt care about numbers that day. We really dont use the dyno for numbers with this car. If I had to say that pull was 800whp - 830whp SAE. The car on the old bad trans dyno'd 920whp I think it was. Remember this is through an automatic transmission. See what it does at the track tomorrow night if the high boost nitrous pulls go good with the new cam sensor, cam sensor plug, trans, etc.
__________________
- Induction Performance
* IP E-Mail
* IP Face Book
* IP Web-Site
* RIP Kevin/Slo_Si RIP & Pablo/Fathead
- Induction Performance
* IP E-Mail
* IP Face Book
* IP Web-Site
* RIP Kevin/Slo_Si RIP & Pablo/Fathead
35.5 psi, stock sleeves
Joined: Jan 2005
Posts: 1,834
Likes: 0
Damn I havent seen that thing in a while... Albert is a cool guy...
__________________
PUREBRED PERFORMANCE
Fabrication & Tuning Services
813-451-7547 or 813-712-0202
Www.PPETUNED.com <~~ WEBSITE
Curious on honda/acura Ecu Chipping and dyno tuning? Call or visit the website above. Hondata/Neptune/Ectune/Crome Pro. Tuning available for most other systems and platforms as well. DYNOJET
PUREBRED PERFORMANCE
Fabrication & Tuning Services
813-451-7547 or 813-712-0202
Www.PPETUNED.com <~~ WEBSITE
Curious on honda/acura Ecu Chipping and dyno tuning? Call or visit the website above. Hondata/Neptune/Ectune/Crome Pro. Tuning available for most other systems and platforms as well. DYNOJET
